BASIN FURNACES
|
|
MELTING |
|
 |
|
MOD. FV 1 |
Tilting Melting stalk furnace, mod.
FV1
Melting stalk furnace, , dry hearth, tilting in axes on the exit
neck, to transfer the liquid Al
alloys |
|
Characteristics
Power
supply Three-phase, 380 V / 50 Hz
Max electric
power 10kw
- Metal temperature adjusted continuously by the submerged
thermocouple
- Limitation of max reachable temperature value in the melting
furnace, by thermocouple in therefractory
furnace walls
- Automatic charging sequence and proceeding, supervisor by the
exit fume temperature
Tank capacity: . . . . . . . . . . . . . . . . . . . 1000 Kg of
molten aluminium
Melting capacity: . . . . . . . . . . . . . . . . . 500 - 700 Kg
/ h.
Bath max. temperature . . . . . . . . . . . . 800 ° C
Refractory max. temperature. . . . . . . . 1000 ° C
Combustible gas . . . . . . . . . . . . . . . . . natural gas -
GPL if requested
Number of burners. . . . . . . . . . . . . . . . 2
Max. rating . . . . . . . . . . . . . . . . . . . . . 400.000
KCal/h
Max consumption. . . . . . . . . . . . . . . . .3
~50 m /
hour
Specific consumption . . . . . . . . . . . . . . 70 m3
/ Ton
Installed power management . . . . . . . . From 0 to 100% with
limit of maximum
|
|
MOD. FB 1 |
Melting Basin Furnace Model FB1 for Al alloys
Melting gas furnace, capacity 2.000 kg do melt Al alloys. It
combines the advantages of traditional architecture to build the
basin furnace, with the most advanced technology and systems
management and control of'onboard systems. |
|
Characteristics
Tank capacity: . . . . . . . . . . . . . . .
. . . . 2000 Kg of molten aluminium
Melting
capacity: . . . . . . . . . . . . . . . . .~ 300 kg/h
Bath max. temperature . . . . . . . . . . . . 800 ° C
Refractory max. temperature. . . . . . . . 1000 ° C
Combustible gas . . . . . . . . . . . . . . . . . natural gas -
GPL if requested /Press.min.
100 mbar
Number of burners. . . . . . . . . . . . . . . . 1
Max. rating . . . . . . . . . . . . . . . . . . . . . 300.000
KCal/h
Max consumption. . . . . . . . . . . . . . . . . 35 m3 /hour (Natural
Gas)
Specific consumption . . . . . . . . . . . . . .~100
m3 / Ton (Natural Gas)
Installed power management . . . . . . . .From 0 to 100% with
limit of maximum
Power supply three-phase, 400 V / 50 Hz
Auxiliary services 24 V C.C./C.A.
- 110 V C.A.(Left
out starting transformes and UV probes , working at 220 V A.C.)
Continued and automatic control of molten aluminium temperature,
by thermoregulator with thermocouple in the bath.
Thermo-limit of refractory temperature by thermoregulator not
visualized and thermocouple in the wall.
|
|
MOD. FF2 |
Melting furnace with two chambers.
It
is a furnace with a dry sole used to melt aluminium and its
alloy. |
Technical
characteristics:
Furnace capacity 2500 Kg molten aluminium
Melting capacity 800 Kg / h.
Max. Bath temperature 800 ° C
Max. Refractory temperature 1000 ° C
Combustible gas Methane (CH4)
Number of burners 3
Melting chamber tapered flame (n.2) max rating 700.000 KCal/h
Holding chamber flat flame (n.1) max rating 220.000 KCal/h
Installed power management from 0 to 100% with limit of maximum
Power supply three-phase , 380 V / 50 Hz
Auxiliary services 24 V C.C. / A.C.
(Left out starting transformers and UV probes, working at 220 V
A.C.)
Gas pressure feeding from 0.3 to 1 bar
Max. consumption 110 Nm3/h
Weight 40.000 Kg
Melting loss: depending on kind of charge; standard conditions
(30% casting, 70% ingots), values between 1.5
and 2.2% max. |
|
MOD. FF4 |
Melting furnace at dry earth mod.FF4 |
Technical characteristics:
Furnace
capacity 1200 Kg molten aluminium
Melting capacity 300 Kg / h.
Max. bath temperature 800 ° C
Max. refractory temperature 1000 ° C
Combustibile gas Methane (CH4)
Number of burners 1 - max. rating 220.000 KCal/h
Installed power management from 0 to 100% with limit of maximum
Power supply three-phase , 380 V / 50 Hz
Auxiliary services 24 V C.C. / A.C.
(Left out starting transformers and UVprobes , working at 220 V
A.C.)
Continued and automatic control of molten aluminium temperature,
by thermoregulator with thermocouple in
the bath.
Thermo-limit of refractory temperature by thermoregulator not
visualized and
thermocouple in the wall.
|
|
MOD. FF5 |
Gases combustion furnace, tower-type, reversing
on casting spout for melting of aluminium alloys. |
|
Technical
characteristics:
Tank capacity: 2500 Kg of
molten aluminium
Melting capacity: until 1500 Kg / h.
Tilting
Bath max. temperature 800 ° C
Refractory max. temperature 1000 ° C
Combustible gas natural gas - GPL if requested
Number of burners 2
Max. rating 950.000 Kcal/h
Max. consumption 110 m3 / h
Specific consumption 70 m3 / Ton
Installed power management from 0 to 100% with limit of maximum
Power supply three-phase , 380 V / 50 Hz
Auxiliary services 24 V C.C. / A.C.
(Left out starting transformers and UV probes, working at 220 V
A.C.)
Melting loss for mixed loads 70%
for ingots: 30%
For feed heads: 1.5 %
380V/50Hz
Continued and automatic control of molten aluminium temperature,
by thermoregulator with
thermocouple in the bath.
Thermo-limit of refractory temperature by thermoregulator not
visualized and thermocouple in the wall. |
|
 |
|
|
Return